V-Master

Rugged, Fast & Field Proven 15.9 mm I.D. to 76.2 mm O.D.



The V-MASTER is a lightweight, small diameter end prep tool for beveling tubes from 15.875mm (5/8”) I.D. to 76.2mm (3”) O.D. Featuring a patented push-pull clamp and release mechanism and permanently attached wrenches, it allows the clamps to release from a tube as easily as they tighten.

Ideal for performing bevel facing and boring on a wide range of tube and pipe alloys, the V-MASTER has dual opposed tapered roller bearings and employs the rigid FABMAX blade locking system to provide chatter-free performance and produce a thick chip without cutting fluids.

The V-Master is a torque free beveling tool for tubes from 15.9mm I.D to 76.2mm O.D. and is only 57.15mm (2.25”) wide which makes it ideal for power station boiler tube work and constrained situations with limited access.

Featuring a push-pull clamp and release mechanism, it allows the clamps to release from a tube as easily as they tighten. Ideal for beveling, facing and boring on a wide range of tube and pipe alloys, the V-Master has dual opposed tapered roller bearings and employ the rigid Lock blade locking system; to provide a chatter-free performance & produce a thick chip without cutting fluids.

Powered by a choice of pneumatic, electric or battery motors and available with a large selection of clamping options, every V-Master includes attached heavy duty wrenches for centering and securing the tool to the tube I.D.


  1. Narrow Body 57.15mm (2.25”)
  2. Light weight and torque free
  3. Interchangeable Pneumatic, Electric or Battery drives are easily switched
  4. Patented clamp system, allows the clamps to release from a tube as easily as they tighten without a hammer
  5. Permanently attached wrenches
  6. Bevel, face and bore simultaneously

Boilermaker Tested and Field Proven


This rugged, agile machine bevels tube and pipe quickly for accurate fit-up which helps ensure high quality welds.


V-Master Jaws Selector and Corresponding spares Mandrel, Draw Rod, Actuator, Retention Bands and Springs


Two Mandrels are offered. The 19.05mm (3/4") is standard and is for G-03A-G-13 Jaws and the H series wedge attaches to it for using H series clamps. The 15.9mm (5/8") Mandrel is for G-02A Jaws.


The G Series Clamps are used on the 0.625”Mandrel and the 3/4" Mandrel


The H Series Wedge fits the 19.05mm (3/4") Mandrel and is used for H-01, H-2,H-03, H-04 & H-05 Jaws Sets.




V-Master CutterHead Blade Lock & Screws


Cutter Head
Part No.
Size(in) Mandrel
Part No.
Size (in) Blade Lock
Part No.
Per Head Lock Screw
Part No.
Per Lock
MG-28C 2.250" MG-38A .625" MG-25 3 MG-24 1
MG-28 2.250" MG-38 .750" MG-25 3 MG-24 1
MG-28A 2.500" MG-38 .750" MG-25A 6 MG-24 1
MG-28B 3.000" MG-38 .750" MG-25B 6 MG-24 1


V-Master Overlay Removal Heads

Membrane
Head
Base
Head
Inserts
Size(in) Part# Part# Part# Qty.
1.187" Mo-203 MGB-103 MRB-8 4
1.250" Mo-204 MGB-104 MRB-8 4
1.375" Mo-205 MGB-106 MRB-8 4
1.500" Mo-206 MGB-106 MRB-8 5
1.625" Mo-207 MGB-106 MRB-8 5
1.750" Mo-208 MGB-106 MRB-8 5
2.000" Mo-209 MGB-106 MRB-8 6

Working Range : 19.1mm I.D. to 76.2mm O.D. (Standard Range)
: 15.9mm I.D. to 76.2mm O.D. (with accessory 5/8" Mandrel kit)


Motor Pneumatic Air Clamp High Torque Slow Speed Electric Cordless
Part No. 200010 200010AC 200010HTSS 200010E 200010C
800w 1.07 hp (800w) 1.25 hp (932w) 120V 8.5A 50/60 Hz 950w, or 18V Li-ion - upto 5.2Ah
90 psi (6.2 bar) 90 psi (6.2 bar) 90 psi (6.2 bar) 220-240V 4.4A 50/60 Hz 950w *115v / 60 hz or
35 cfm (990 lt/min) 35 cfm (990 lt/min) 40 cfm (990 lt/min) - *220 - 240V 50-60 hz
Speed 108 rpm 108 rpm 100 rpm 14 rpm - 58 rpm 43 rpm
Min. Width Clearance 57.2 mm 92.1 mm 57.2 mm 57.2 mm 57.2 mm
Head Length 387.4 mm 470 mm 387.4 mm 387.4 mm 387.4 mm
Membrane & Overlay Heads 47.6 mm 92.1 mm 47.6 mm 47.6 mm 47.6 mm
Head Length 355.6 mm 406.4 mm 355.6 mm 355.6 mm 355.6 mm
Working Weight 6.7 kg 7.75 kg 7.1 kg 7.21 kg 7.44 kg
Shipping Weight 14.53 kg 19.02 kg 14.9 kg 18.14 kg 18.41 kg
Shipping Dimensions 20” x 18” x 5”
508mm x 457mm x 127mm
24” x 20” x 7”
610mm x 51mm x 178mm
20” x 18” x5”
508mm x 457mm x 127mm
24” x 20” x 6”
610mm x 508mm x 152mm
24” x 20” x 6”
610mm x 508mm x 152mm


Download Catalog


ENQUIRE NOW


Name





Email



Phone


Message



Congratulations. Your message has been sent successfully
Error, please retry. Your message has not been sent