Champion


Powerful, smooth & quiet.
The world standard for all other tools of its type 40 mm I.D. to 219.1 mm O.D.



Typical application include :
End prepping stainless steel, super duplex, P-91 and other hard to machine alloys. High Performance, Low Maintenance

Like all other FABMAX Tools high performance and low maintenance were important design criteria for the Champion. This tool is suitable for end prep prepping of any type of tube material including Super Duplex and uses one mandrel to cover the full operating range of the tool.


  1. Only 1 mandrel and 8 sets of clamps to cover entire range.
  2. Third Cutter Blade Tool Post expands pipe beveling capacity for beveling, facing and boring simultaneously
  3. Optional flange facing attachment
  4. Low rpm and tremendous torque
  5. Produces thick chips on all highly alloyed tube and pipe without cutting fluids
  6. Pneumatic, electric and hydraulic motor choices are easily interchanged
  7. Dual opposed tapered roller bearing construction delivers rock solid performance
  8. Heavy duty clamping system will not break

High Performance, Low Maintenance


The Champion is smooth, quiet and powerful. It is highly desired for its ability to bevel difficult pipe alloys likes super duplex and P-91 quickly and efficiently.


Ruggedly designed for years of trouble free service, the Champion is built with dual opposed tapered roller bearings, heat treated and hardened clamping, cutting and operational components.


It can bevel pipe at any angle without cutting fluid for fast fit-up and enables precise pipe joint welds. Additionally, it only requires oil and grease for routine maintenance.



Champion Jaws set Selector & corresponding spares Mandrel, Draw Rod, Actuator, Roll Pin, Retention Bands and Springs


Jaws set
Part No.
I.D. Range mm Mand.
P. No.
Size (in) Draw Rod Act. Roll Pin Retn.
Band/Spr.
P-01 40.0 52.1 P-30 1.575 P-11 P-14 P-10 H-14B
P-02 51.4 63.6 P-30 1.575 P-11 P-14 P-10 P-10A
P-03 62.9 75.1 P-30 1.575 P-11 P-14 P-10 P-10A
P-04 74.3 86.5 P-30 1.575 P-11 P-14 P-10 P-10A
P-02 & 05 85.7 97.9 P-30 1.575 P-11 P-14 P-10 P-10A
P-03 & 05 97.2 109.3 P-30 1.575 P-11 P-14 P-10 P-10A
P-04 & 05 108.6 120.8 P-30 1.575 P-11 P-14 P-10 P-10A
P-02 & 06 120.0 132.2 P-30 1.575 P-11 P-14 P-10 P-10A
P-03 & 06 131.4 143.6 P-30 1.575 P-11 P-14 P-10 P-10A
P-04 & 06 142.9 155.1 P-30 1.575 P-11 P-14 P-10 P-10A
P-02 & 07 154.3 166.5 P-30 1.575 P-11 P-14 P-10 P-10A
P-03 & 07 165.7 177.3 P-30 1.575 P-11 P-14 P-10 P-10A
P-04 & 07 176.5 188.7 P-30 1.575 P-11 P-14 P-10 P-10A
P-02 & 08 188.0 200.2 P-30 1.575 P-11 P-14 P-10 P-10A
P-03 & 08 199.4 211.6 P-30 1.575 P-11 P-14 P-10 P-10A
P-04 & 08 210.8 223.0 P-30 1.575 P-11 P-14 P-10 P-10A





Working Range :
40mm I.D. to 219.1mm O.D.

Motor Pneumatic Electric Hydraulic
Part No. 200005 200005E 200005H
2 hp (1491w) 120V AC 50/60 Hz 1800W, or Pump requirements
90 psi (6.2 bar) 230V AC 50/60Hz 1800W 19-38 lpm @ 1500 psi
40 cfm (1133 lt/min) 80 liter tank
Speed 34 rpm 9 rpm - 31 rpm 1 rpm - 16 rpm
Min. Width Clearance
With 8.750in (222.2mm)Tool post 222.3 mm 222.3 mm 222.3 mm
Head Length 501.7 mm 501.7 mm 660.4 mm
Working Weight 20 kg 24.5 kg 55.4 kg
Shipping Weight 50 kg 54.5 kg 25 kg
Shipping Dimensions 27” x 21” x 7”
686mm x 534mm x 178mm
27” x 21” x 7”
686mm x 534mm x 178mm
27” x 21” x 7”
686mm x 534mm x 178mm



Download Catalog


ENQUIRE NOW


Name





Email



Phone


Message



Congratulations. Your message has been sent successfully
Error, please retry. Your message has not been sent