Chamfermax


I.D. Clamping End Prep Tool 31.8mm I.D. to 168.3mm O.D. (1.25" I.D. to 6.625" O.D.)
Cuts heavy wall pipe or tube! Fast, chatter-free and easy to use...



CHAMFERMAX is the most ruggedly built and efficiently designed tools available today for milling heavy wall pipe and tube from 31.8mm (1.25") I.D. to 168.27mm (6.625") O.D. Rigidly mounting to the I.D. by a draw rod clamping assembly which centers the tool automatically, it utilizes a ratchet mechanism for feeding the cutter head. Featuring Titanium Nitride coated cutter blades for smooth milling, without requiring cutting oils, it produce a clean, continuous chip and square off the end of the pipe or tube.


  1. Tool rigidly mounts to pipe or tube I.D.
  2. Self-Centering
  3. Heavy duty spur gear drive train delivers optimum rpm, torque and maximum durability
  4. One mandrel covers the majority of the tool’s range
  5. Fabmax cutter blade holding system achieve chatter-free bevels on tough tube and pipe alloys
  6. Removes tube stub welds and prepares the header
  7. Removes tube weld overlay and cladding
  8. Torque-free
  9. Choice of pneumatic or electric motors
  10. Produces clean continuous chip without cutting fluids
  11. Lightweight and simple to operate and maintain

Rugged, Fast and Reliable


The Chamfermax is a ruggedly built beveling tool with a spur gear drive train and bevels all tube and pipe alloys to 168.3mm O.D. it’s combination of rpm and torque also make it ideal for tube stub weld removal and tube overlay and cladding removal.


All clamping components including the draw rod are heat treated and provide the strength to rigidly secure the tool on the inside diameter of the tune or pipe. The Fabmax cutter blade holding system securely holds the cutters in the tool post and helps reduce chatter and produce a clean, continuous chip on most pipe and tube alloys without cutting fluids.


Easy to operate and maintain, this tool delivers a lot of performance in a small package and is available with either a pneumatic or electric motor.


Two Mandrels are offered, with the 45.72mm as standard. The 1-1/4” Mandrels can be ordered as optional equipment. The 1-1/4” Mandrel uses the H Series Clamps.



Chamfermax Jaws set Selector and corresponding spares Jaws sets, Mandrel, Draw rod, Actuator, Roll Pin, Retention Band and Springs.


Jaws set
Part No.
I.D. Range mm Mand.
P. No.
Size (in) Draw Rod Act. Roll Pin Retn.
Band/Spr.
H-01 31.8 40.6 M-361 1.250 M-65 H-12 H-11 H-14B
H-02 38.8 48.9 M-361 1.250 M-65 H-12 H-11 H-14B
M-01 45.8 57.6 M-36 1.800 M-53 M-46 M-47 M-52
M-02 56.9 68.4 M-36 1.800 M-53 M-46 M-47 M-52
M-03 67.7 79.2 M-36 1.800 M-53 M-46 M-47 M-52
M-04 77.4 88.9 M-36 1.800 M-53 M-46 M-47 M-52
M-02 & 05 86.7 98.1 M-36 1.800 M-53 M-46 M-47 M-52
M-03 & 05 96.0 107.4 M-36 1.800 M-53 M-46 M-47 M-52
M-04 & 05 105.3 116.7 M-36 1.800 M-53 M-46 M-47 M-52
M-02 & 08 114.5 126.0 M-36 1.800 M-53 M-46 M-47 M-52
M-03 & 08 123.8 135.2 M-36 1.800 M-53 M-46 M-47 M-52
M-04 & 08 133.1 144.5 M-36 1.800 M-53 M-46 M-47 M-52
M-04 & 08 133.1 144.5 M-36 1.800 M-53 M-46 M-47 M-52
M-02 & 11 142.3 153.8 M-36 1.800 M-53 M-46 M-47 M-52
M-03 & 11 151.6 163.0 M-36 1.800 M-53 M-46 M-47 M-52



Chamfermax Membrane Removal Heads

Overlay
Head
Base
Head
Inserts
Size(in) Part# Part# Part# Qty.
2.5" Mo-213 MMB-113 MRB-8 7
2.75" Mo-214 MMB-113 MRB-8 7
3" Mo-215 MMB-113 MRB-8 8



Electric and Pneumatic motors offer plenty of power for end prepping a wide range of pipe and tube alloy.




Overlay is removed from new and existing tubes and their ends are prepared for welding to new tubes.




Portable for on-site and tube beveling. Tube stub weld removal from header also prepares the header for new tube installation.

Working Range :
31.8mm (1.250”) I.D. to 168.3mm (6.625”) O.D.

Motor Pneumatic Electric
Part No. 200008 200008E
932w 120V AC 50/60Hz 1800W, or
90 psi (6.2 bar) 230V AC 50/60Hz 1800W
40 cfm (1133 lt/min)
Speed 55 rpm 19 rpm - 66 rpm
Min. Width Clearance
With 66.68mm Head 168.3 mm / 134.6 mm 168.3 mm / 134.60 mm
Head Length 362 mm 362 mm
Working Weight 12.5 kg 17.6 kg
Shipping Weight 29.5 kg 34.5 kg
Shipping Dimensions 17” x 31” x 6”
431.8 x 5787.5 x 152 mm
24” x 21” x 7”
610 x 533.48 x 178mm



Download Catalog


ENQUIRE NOW


Name





Email



Phone


Message



Congratulations. Your message has been sent successfully
Error, please retry. Your message has not been sent