Admiral


I.D. Clamping End Prep Tool 219 mm I.D. to 915 mm O.D.
Cuts heavy wall pipe or tube! Fast, chatter-free and easy to use...



The Admiral is a powerful, easy to use ID clamping end prep machine capable of delivering precision end preps on pipe of all alloys including Super Duplex and has a working range of 219mm (8-5/8") ID to 915mm (36") OD pipe. A powerful 5 h.p. pneumatic motor or available hydraulic motor provide smooth quite operation and are easily interchanged. The Admiral rigidly mounts to the pipe ID and uses form tool bits for wall thicknesses in excess of 63.5mm (2.5"). The available ID Tracker creates precision symmetrical end preps on out of round pipe at any angle, including "J" Bevel.


Portable easy to align and secure to heavy wall pipe up to 36” O.D.


  1. Rigidly clamps to pipe up to 36”
  2. Pneumatic or hydraulic motor choices
  3. 8 sets of clamp ribs and pads and 2 wedges cover entire range
  4. Formed tool bits can be used for m.w.t. up to 2.5”
  5. Preps all pipe alloys
  6. Bevels any angle of weld prep
  7. Simple to operate
  8. Patented safety chain and dual spring hanger makes tool alignment easy and safe
  9. Available I.D. tracker, adjustable height facing and tool post with preset angles
  10. Sliding tool post is simple to adjust to adjust and easy to secure

Rugged, built for the toughest applications


The Admiral is a ruggedly constructed precision pipe beveling machine for performing weld joint bevels at any angle on pipe ends upto 36”.


Built with state of the art materials that are precision machined, heat treated and hardened, the Admiral is designed to provide years of trouble free service on the toughest applications.


A gear box torque multiplier can be added that doubles the torque and slows the rpm which permits the cutter blade to get under the material and pull a thick chip on alloys prone to work hardening such as stainless, duplex and other super alloys.


The included safety chain spring hanger permits the Admiral to be safely and easily aligned and secured square to the pipe. The available I.D. tracker creates precision symmetrical bevels on out of round pipe at any angle and formed tool bits are available for pipe with wall thicknesses up to 2.5”.





I.D. Range mm Clamp Combination Wedge
Part No.
Actuator
Part No.
Draw Rod
Part No.
219.08 273.05 T1 Jaw Set T-17 T-14 T-16
317.50 374.65 T1&T3 Jaw Set & Pad Set T-17 T-14 T-16
368.30 425.45 T1&T4 Jaw Set & Pad Set T-17 T-14 T-16
419.10 476.25 T1&T5 Jaw Set & Pad Set T-17 T-14 T-16
469.90 527.05 T1&T-219 Extension & T2 Jaw Set & Extension & Pad Set T-17 T-14 T-16
520.70 577.85 T1&T-219 Extension & T3 Jaw Set & Extension & Pad Set T-17 T-14 T-16
571.50 628.65 T1&T-219 Extension & T4 Jaw Set & Extension & Pad Set T-17 T-14 T-16
622.30 679.45 T1&T-219 Extension & T5 Jaw Set & Extension & Pad Set T-17 T-14 T-16
374.65 412.75 T1 Jaw Set T-18 T-15 T-16
406.40 469.90 T1&T2 Jaw Set & Pad Set T-18 T-15 T-16
457.20 520.70 T1&T3 Jaw Set & Pad Set T-18 T-15 T-16
508.00 571.50 T1&T4 Jaw Set & Pad Set T-18 T-15 T-16
558.00 622.30 T1&T5 Jaw Set & Pad Set T-18 T-15 T-16
609.60 673.10 T1&T6 Jaw Set & Pad Set T-18 T-15 T-16
660.40 723.90 T1&T-374 Extension & T2 Jaw Set & Extension & Pad Set T-18 T-15 T-16
711.20 774.70 T1&T-374 Extension & T3 Jaw Set & Extension & Pad Set T-18 T-15 T-16
762.00 825.50 T1&T-374 Extension & T4 Jaw Set & Extension & Pad Set T-18 T-15 T-16
812.80 876.30 T1&T-374 Extension & T5 Jaw Set & Extension & Pad Set T-18 T-15 T-16
863.60 927.10 T1&T-374 Extension & T6 Jaw Set & Extension & Pad Set T-18 T-15 T-16




The Admiral Fabmax Bevels all pipe alloys at any angle for precision fit-up on wall thicknesses up to 63.5mm (2.5”) using formed tool bits.




Working Range :
219mm I.D. to 914.4mm O.D.

Motor Pneumatic Hydraulic
Part No. 200007 200007H
5 hp (3728w) 5 hp (30.3-45.4 l/min)
90 psi (6.2 bar) @ 1500 psi (102 bar)
95 cfm (2690 lt/min) 75.7 1 reservioir
Speed 4 rpm 1 rpm - 4 rpm
Speed with Off-Set Gear Reducer 2 rpm with gear reducer 1 rpm - 2 rpm
Min. Clearance 762 mm 762 mm
Head Length 1270 mm 1270 mm
Working Weight 318 kg 318 kg
Shipping Weight 623.7 kg 623.7 kg
Shipping Dimensions 36” x 54” x 48”
915 x 1372 x 1219mm
36” x 54” x 48”
915 x 1372 x 1219mm

Download Catalog


ENQUIRE NOW


Name





Email



Phone


Message



Congratulations. Your message has been sent successfully
Error, please retry. Your message has not been sent